CAMCO Lubricants FMO-7-220 Food Grade Gear & Bearing Oil – NSF H1 – ISO VG 220 – 5 Gal

Key Features:

• Fully Synthetic gear and bearing oil, with a synthetic hydrocarbon base.
  
• Food Grade. Registered by the NSF in Category H1.
• Kosher Certified.
• Excellent mechanical shear resistance even in heavily loaded applications.
  
• Improved cold temperature fluidity. Extended service life.
  

Description:
CAMCO® Lubricants FMO-7-220 is a fully formulated synthetic gear and bearing lubricant based on synthetic hydrocarbons. It has excellent thermal and oxidative stability, combined with superior gear load-carrying ability. The synthetic hydrocarbon base provides extended service life and overall economic benefits. Synthetic hydrocarbons combine high viscosity indexes, high film strength and excellent mechanical shear resistance even in heavily loaded applications. Field test reduction in heat build-up due to friction. The reduced friction may also reduce horsepower requirement up to ten percent depending on other operating and environmental conditions.
CAMCO® FMO-7-220 has excellent low-temperature properties.
Authorized by USDA for use in Federally inspected meat and poultry plants. Registered by the NSF in Category H-1. Registration Number 135612. Complies with FDA 21 CFR 178.3570 - Lubricants with Incidental Food Contact.

Packaging:
Available in 5 gallon pails. Contact Us to get a quote for this product in drums.

How to Use:
For optimum performance clean thoroughly the lubrication point, first mechanically and then with an appropriate food safe cleaner. Before initial filling of gears, remove corrosion protection agent. Fill gear so that the dipping teeth receive lubricant. Apply sufficient amount with a brush, dripping oiler, by dipping or central lubrication systems. Observe instructions of the gear and machine manufacturer. Relubrication intervals and amount should be determined according to service conditions. Don't mix with other lubricants.

Typical Applications:
CAMCO® FMO-7-220 synthetic gear oil is also suitable for multipurpose lubrication in the food industry.

Typical Properties:

*These values are not intended for use in preparing specifications.